Ricoh B205 Service Manual page 286

SERVICE PROGRAM MODE
5974 Cherry Server
Selects which version of the Scan Router application program, "Light" or "Full
(Professional)", is installed.
[0 ~ 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
5985 Device Setting
The NIC and USB support features are built into the GW controller. Use this SP
to enable and disable these features. In order to use the NIC and USB functions
built into the controller board, these SP codes must be set to "1".
5985 1 On Board NIC
5985 2 On Board USB
5990 SP Print Mode
In the SP mode, press Copy Window to move to the copy screen, select the
paper size, then press Start. Select A4/LT (Sideways) or larger to ensure that
all the information prints. Press SP Window to return to the SP mode, select
the desired print, and press Execute.
5990 1 All (Data List)
5990 2 SP (Mode Data List)
5990 3 User Program
5990 4 Logging Data
5990 5 Diagnostic Report
5990 6 Non-Default (Prints only SPs set to values other than defaults.)
5990 7 NIB Summary
5990 8 Capture Log
5990 21 Copier User Program
5990 22 Scanner SP
5990 23 Scanner User Program
5995 Factory Mode
5996 Machine State DFU
5996 1 Destination
5996 2 SBCU ID
5996 3 IPU ID
B205/B209/D007/D008
0: Disable 1: Enable
SMC Print
DFU
Shows intended destination of the engine board.
0: Japan
1: North America
2: Europe
3: Mainland China
4: Taiwan
Displays the CPM information for the engine
board. For example, 25 (25 cpm), 30 (30 cpm),
and so on.
Displays the IPU ID (presently fixed at "30").
5-72 SM