Ricoh B205 Service Manual page 357

Rev. 07/14/2009
5.9.2 DOWNLOADING NVRAM DATA (SP5-825)
1. Turn OFF the Main Switch.
2. Remove the SD card cover [A].
3. Plug the SD card [B] into SD card slot C3..
4. Turn ON the Main Switch.
5. Execute SP5-825.
6. Press Execute to start downloading the NVRAM
data.
Note that the following errors could occur during
downloading:
• If a card is not installed in the card slot and a
message tells you that downloading cannot proceed, you cannot execute
downloading, even by pressing .
• If the correct card for the NVRAM data is not inserted in the card slot, after you
press  a message will tell you that downloading cannot proceed because the
card is abnormal and the execution will halt.
SM
UPLOADING/DOWNLOADING NVRAM DATA
5-143
[A]
[B]
B195S906.WMF
B205/B209/D007/D008