Sp5Xxx: Mode - Ricoh B205 Service Manual

SERVICE PROGRAM MODE

SP5XXX: Mode

5024* mm/inch Selection
Selects whether mm or inches are used in the display.
Note: After selecting the number, you must turn the main power switch off and on.
Europe/Asia model: [0 = mm / 1 = inch]
American model: [0 = mm / 1 = inch]
5044 Operation Panel Bit SW
5044 1 SW1 DFU
5044 2 SW2 DFU
5045 Accounting Counter
Selects whether the printer counter is displayed on the LCD.
[0~1/0/1]
0: Displays total counter only.
1: Displays both total counter and printer counter.
5051 Toner Refill Detection Display
Switches the toner refill prompt display off on. Default: On
5055 Display IP Address
Switch the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
If this SP is switched on, the IP address will be displayed below "Ready" while the
machine is in stand by mode.
5104* A3/DLT Double Count
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from the
bypass tray. When "Yes" is selected, A3 and DLT paper are counted twice, that is
A4 x2 and LT x2 respectively.
B205/B209/D007/D008 5-38 SM