1.2.3 UNDO EXEC
1. Turn the main switch off.
2. Put the SD card with the merged applications in C2.
3. Put the original destination SD card (the one that is kept by the customer) into
C3.
NOTE: The SD card in C3 must be the original SD card for the application you
want to move from C2 to C3. You cannot use a different blank SD card
in C3.
4. Turn the main switch on.
5. Go into the SP mode and do SP5873-002 (Undo Exec).
6. Follow the messages on the operation panel to complete the procedure.
7. Turn the main switch off.
8. Remove the SD cards from the slots.
9. Turn the main switch on.
SM
MERGING APPLICATIONS ON ONE SD CARD
5
B767/B846