Ricoh B205 Service Manual page 275

5846 6 Delivery Server Retry Timer
Sets the interval for retry attempts when the delivery server fails to acquire the
delivery server address book.
[0~255/1 s]
0: No retries
5846 7 Delivery Server Retry Times
Sets the number of retry attempts when the delivery server fails to acquire the
delivery server address book.
[0~255/ 0 /1]
5846 8 Delivery Server Maximum Entries
Lets you set the maximum number of account entries and information about the
users of the delivery server controlled by UCS.
[20000~50000/ 20000 /1]
5846 10 LDAP Search Timeout
Sets the length of the time-out for the search of the LDAP server.
[1~255/ 60 /1]
5846 40 Addr Book Migration (SD -> HDD)
This SP moves the address book data from an SD card to the HDD. You must
cycle the machine off and on after executing this SP.
1. Turn the machine off.
2. Install the HDD.
3. Insert the SD card with the address book data in SD card slot C3.
4. Turn the machine on.
5. Do SP5846 040.
6. Turn the machine off.
7. Remove the SD card from SD card slot C3.
8. Turn the machine on.
Notes:
•
Executing this SP overwrites any address book data already on the HDD
with the data from the SD card.
•
We recommend that you back up all directory information to an SD card
with SP5846 051 before you execute this SP.
•
After the address book data is copied to HDD, all the address book data
is deleted from the source SD card. If the operation fails, the data is not
erased from the SD card.
5846 41 Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a basic
machine that previously had no HDD. The first time the machine is powered on
with the new HDD installed, the system automatically takes the address book
from the NVRAM and writes it onto the new HDD. However, the new address
book on the HDD can be accessed only by the system administrator at this stage.
Executing this SP by the service technician immediately after power on grants full
address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
However, at this point the address book can be accessed by only the system
administrator or key operator.
5. Enter the SP mode and do SP5846 041. After this SP executes successfully,
any user can access the address book.
SM
SERVICE PROGRAM MODE
5-61 B205/B209/D007/D008