Ricoh B205 Service Manual page 733

BIT SWITCHES
IP Fax Switch 06
No. FUNCTION
Modem bit rate setting for reception
Sets the modem bit rate for reception. The default is "0110" (14.4K bps).
Bit 7 Bit 6
0 0
0-3
0 0
0 0
0 1
0 1
Modem setting for reception
Sets the modem type for reception. The default is "0100" (V27ter, V29, V17).
Bit 3 Bit 1
0 0
4-7
0 1
0 1
1 0
1 0
IP Fax Switch 07
No. FUNCTION
0 TSI information
0: Not added, 1: Added
1 DCN transmission setting at T1
timeout
0: Not transmitted, 1: Transmitted
2 Not used
3 Hang up setting at DIS reception
disabled
0: No hang up
1: Hang up after transmitting DCN
4 Number of times for training
0: 1 time, 1: 2 times
5 Space CSI transmission setting at
no CSI registration
0: Not transmitted, 1: Transmitted
6-7 Not used
SM
Bit 5 Bit 4
0 1 V27ter
1 0 V27ter, V29
1 1 V27ter, V29, V33 (invalid)
0 0 V27ter, V29, V17
0 1 V27ter, V29, V17, V34
Bit 1
1 V27ter
0 V27ter, V29
1 Not used
0 V27ter, V29, V17
1 V27ter, V29, V17,
V34
Adds or does not add TSI information to
NSS(S).
Transmits or does not transmit DCN at T1
timeout.
Do not change this setting.
Sets whether the machine disconnects after
DIS reception.
Selects the number of times training is done at
the same bit rate.
When "0" is selected, frame data is enabled.
When "1" is selected, the transmitted data is
all spaces.
Do not change these settings.
83
SP No. 1-111-007
COMMENTS
SP No. 1-111-008
COMMENTS
B766