Uploading/Downloading Nvram Data - Ricoh B205 Service Manual

UPLOADING/DOWNLOADING NVRAM DATA

⇒
5.9 UPLOADING/DOWNLOADING NVRAM DATA
The content of the NVRAM can be uploaded to and downloaded from an SD card.
IMPORTANT NOTE:
The following data stored in the NVRAM will not be saved on the SD Card when
performing an NVRAM Data Upload (SP5824):
• Total count categories (SP7-003-*** Copy Counter)
• C/O, P/O Counter (SP7-006-*** C/O, P/O Count Display)
• Dupelx, A3/DLT/Over 420 mm, Stapler and Scanner application scanning
counters (system settings).
• Engine SP Data
Therefore, whenever an NVRAM Upload/Download is performed, make sure to
print out the SP Data List before performing SP5801-001 (Memory Clear: All Clear)
or SP5801-002 (Memory Clear: Engine).
NVRAM Upload/Download Procedure:
1) Print out the SP Data list from SP5990-002.
2) Perform the NVRAM Data Upload (to the SD Card) according to the
procedure below.
3) Perform the Memory Clear (SP5801-001 or 002).
4) Perform the NVRAM Data Download (from the SD Card) according to the
procedure below.
5) Manually input the data listed above.
5.9.1 UPLOADING NVRAM DATA (SP5-824)
1. Turn OFF the Main Switch.
2. Remove the SD card cover [A].
3. Insert the SD card [B] into SD card slot C3.
4. Turn ON the Main Switch.
5. Execute SP5-824.
6. Press Execute to start uploading the NVRAM
data.
B205/B209/D007/D008 5-142
Rev. 07/14/2009
[A]
[B]
B195S905.WMF
SM