Ricoh B205 Service Manual page 668

Code Meaning
14-06 User Not Found on SMTP
Server (551)
14-07
Data Send to SMTP Server
Failed (4XX)
14-08 Data Send to SMTP Server
Failed (5XX)
14-09
Authorization Failed for
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
14-30 MCS File Creation Failed
14-31 UFS File Creation Failed
14-32 Cancelled the Mail Due to
Error Detected by NFAX
14-33 No Mail Address For the
Machine
14-34 Address designated in the
domain for SMTP sending
does not exist
B766
Suggested Cause/Action
The designated user does not exist.
• The designated user does not exist on the SMTP
server.
•
The designated address is not for use with direct
SMTP sending.
Failed to access the SMTP server because the
transmission failed.
• PC not operating correctly.
• SMTP server operating incorrectly
• Network not operating correctly.
• Destination folder setting incorrect.
•
Direct SMTP sending not operating correctly.
Failed to access the SMTP server because the
transmission failed.
• SMTP server operating incorrectly
• Destination folder setting incorrect.
• Direct SMTP sending not operating correctly.
•
Software application error.
• POP-Before-SMTP or SMTP authorization failed.
•
Incorrect setting for file transfer
Number of broadcast addresses exceeded the limit
for the SMTP server.
The send buffer is full so the transmission could not
be completed. Buffer is full due to using Scan-to-
Email while the buffer is being used send mail at the
same time.
Transmission was cancelled because the detected
size of the file was too large.
Processing is interrupted because the user pressed
Stop.
Failed to create the MCS file because:
• The number of files created with other
applications on the Document Server has
exceeded the limit.
• HDD is full or not operating correctly.
•
Software error.
UFS file could not be created:
• Not enough space in UFS area to handle both
Scan-to-Email and IFAX transmission.
• HDD full or not operating correctly.
•
Software error.
Error detected with NFAX and send was cancelled
due to a software error.
Neither the mail address of the machine nor the mail
address of the network administrator is registered.
Operational error in normal mail sending or direct
SMTP sending.
• Check the address selected in the address book
for SMTP sending.
•
Check the domain selection.
18
ERROR CODES
SM