Ricoh B205 Service Manual page 195

Code No.
995 D Machine Type Information Error
After the machine power is turned on, a mismatch is
detected between the CPM information sent from
the controller to the engine.
Code No.
997 B Application function selection error
The application selected by a key press on
operation panel does not start or ends abnormally.
998 D Application start error
After power on, the application does not start within
60 s. (All applications neither start nor end
normally.)
SM
Symptom
Symptom
4-17
SERVICE CALL CONDITIONS
Possible Cause
• Replace the controller
board with the correct
board.
Possible Cause
• Update the firmware for
the application that failed
• An option required by
the application (RAM,
DIMM, board) is not
installed
• Download controller
firmware
• Replace the controller
board
• An option required by
the application (RAM,
DIMM, board) is not
installed
B205/B209/D007/D008