Bluetooth Unit (B826) - Ricoh B205 Service Manual

INSTALLING OTHER OPTIONS

1.3.3 BLUETOOTH UNIT (B826)

Accessories
Check the accessories and their quantities against the following list:
Description
1. Bluetooth Unit ......................................................................1
2. PCI Card..............................................................................1
3. Cap ......................................................................................1
CAUTION
TURN OFF THE MAIN POWER SWITCH AND DISCONNECT THE POWER SUPPLY CORD
NOTE: You can install only one of these network interfaces at the same time: IEEE
802.11b (Wireless LAN), IEEE1284 (Parallel/Centronics), or Bluetooth.
1. Remove the cover [A] of board Slot 1 or 2 (
2. Attach the interface board [B] to the controller board (
NOTE: Use a screwdriver to tighten the knob-screws. Do not tighten manually,
because this can disconnect the board.
3. Install the Bluetooth card [C] in the slot in the Bluetooth unit.
4. Attach the antenna cap [D].
D318
[B]
20
Q'ty
[A]
[C]
[D]
x1).
x2 knob screws).
.
SM