Table of Contents
Advertisement
SERVICE PROGRAM MODE
4.2.3 TEST PATTERN PRINTING (SP4-417 AND SP5-902)
1. Input the level 3 number for the test pattern you need.
2. Press the M (Interrupt) key on the display to access the copy mode display.
3. Select the required copy features such as paper size, image density, and
reproduction ratio.
4. Press the D key to print the test pattern.
5. After checking the test pattern, exit copy mode by pressing the M (Interrupt)
key again.
6. Exit SP mode.
No.
Test Pattern (SP4-417)
0
No Print
1
Vertical Lines (single dot)
2
Horizontal Lines (single dot)
3
Vertical Lines (double dots)
4
Horizontal Lines (double dots)
5
Alternating Dot Pattern
6
Grid Pattern (single dot)
7
Vertical Stripes
8
Grayscales (Horizontal)
9
Grayscales (Vertical)
10 ID Patch
11 Cross Pattern
12 Argyle Pattern
13 Trimming Area
14 Vertical Lines (double dots) - SBU
15 Grid Pattern (single dot) - SBU
16 16 Grayscales - SBU
No.
Test Pattern (SP5-902)
0
No Print
1
Vertical Lines (single dot)
2
Horizontal Lines (single dot)
3
Vertical Lines (double dots)
4
Horizontal Lines (double dots)
5
Grid Pattern (single dot)
6
Grid Pattern (double dots)
7
Alternating Dot Pattern
8
Full Dot Pattern
9
Black Band
10 Trimming Area
11 Argyle Pattern
12 Grayscales (Horizontal)
13 Grayscales (Vertical)
14 Grayscales (Vert./Hor.)
15 Grayscales (Vert./Hor. Overlay)
Grayscales with white lines
16
(Horizontal)
Grayscales with white lines
17
(Vertical)
Grayscales with white lines
18
(Vert./Hor.)
4-60
20 September 1999
Advertisement
Table of Contents
