Test Pattern Printing: Sp - Ricoh B079 Service Manual

SERVICE PROGRAM MODE TABLES

5.1.4 TEST PATTERN PRINTING: SP2-902

NOTE: Always print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2-902.
2. Press  or .
•  IPU Test Print
•  Test Pattern
3. Enter the number for the test pattern that you want to print and press OK. (See
the tables below.)
4. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
5. Press Start  twice. (Ignore the "Place Original" messages) to start the test
print.
6. Press SP Mode (highlighted) to return to the SP mode display.
Test Pattern Table (SP2-902-2: IPU Test Print)
No. Test Pattern
0 None
1 Vertical Line (1-dot)
2 Horizontal Line (1-dot)
3 Vertical Line (2-dot)
4 Horizontal Line (2-dot)
5 Alternate Dot Pattern
6 Grid Pattern (1-dot)
7 Vertical Stripes
B079/B082
CÓPIA NÃO CONTROLADA
No. Test Pattern
8 Grayscale (Horizontal) (8)
9 Grayscale (Vertical) (8)
10 Cross Pattern (8)
11 Cross Shape
12 Argyle Pattern
13 Cross Pattern (256)
14 Cross Pattern (64)
15 Not used
5-70
CÓPIA NÃO CONTROLADA
SM