Test Pattern Printing (Sp 5-902) - Ricoh A193 Service Manual

SERVICE PROGRAM MODE

2.2.2 Test Pattern Printing (SP 5-902)

1. Access the SP mode which contains the test pattern you need.
2. Press the Interrupt key on the display to access the copy mode display.
3. Select the required copy features such as paper size, image density, and
reproduction ratio.
4. Press the Start key on the operation panel.
5. After checking the test pattern, exit copy mode by pressing the Interrupt
key on the operation panel.
ö
6. Press the
Test Pattern Table for SP5-902
No. Test Pattern
0 No Print
1 Vertical Lines (single dot)
2 Horizontal Lines (single dot)
3 Vertical Lines (double dots)
4 Horizontal Lines (double dots)
5 Grid Pattern (single dot)
6 Grid Pattern (double dots)
7 Alternating Dot Pattern
8 Full Dot Pattern
9 Black Band
10 Trimming Area
11 Argyle Pattern
12 16 Grayscales (Horizontal)
13 16 Grayscales (Vertical)
14 16 Grayscales (Vert./Hor.)
15 16 Grayscales (Vert./Hor. Overlay)
(A193)
key three times to exit the SP mode.
No.
16 32 Grayscales (Horizontal)
17 32 Grayscales (Vertical)
18 32 Grayscales (Vert./Hor.)
19 32 Grayscales (V/H Overlay)
20 64 Grayscales (Horizontal)
21 64 Grayscales (Vertical)
22 64 Grayscales (Vert./Hor.)
23 64 Grayscales (V/H Overlay)
24 16 Grayscales (Horizontal)
25 16 Grayscales (Vertical)
26 16 Grayscales (Vert./Hor.)
27 32 Grayscales (Horizontal)
28 32 Grayscales (Vertical)
29 32 Grayscales (Vert./Hor.)
30 64 Grayscales (Horizontal)
31 64 Grayscales (Vertical)
32 64 Grayscales (Vert./Hor.)
4-32
Test Pattern
SM