Test Pattern Printing (Sp2-902-3) - Ricoh Russian-C2a Service Manual

10 August, 2001

4.2.3 TEST PATTERN PRINTING (SP2-902-3)

NOTE: Always print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2-902-3.
2. Press !.
3. Enter the number for the test pattern that you want to print and press ". (See
the tables below.)
4. When you are prompted to confirm your selection, press Yes. This selects the
test pattern for printing.
5. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
6. Press Start # twice. (Ignore the "Place Original" messages) to start the test
print.
7. Press SP Mode (highlighted) to return to the SP mode display.
No. Test Pattern
0 None
1 Vertical Line (1-dot)
2 Horizontal Line (1-dot)
3 Vertical Line (2-dot)
4 Horizontal Line (2 dot)
5 Grid Pattern (1-dot)
6 Grid Pattern (1-dot pair)
7 Alternating Dot Pattern
8 Full Dot Pattern
9 Black band
10 Trimming Area
11 Argyle Pattern
12 Grayscale (Horizontal)
13 Grayscale (Vertical)
14 Grayscale (Vertical/Horizontal)
SERVICE PROGRAM MODE
No. Test Pattern
15 Grayscale (Grid)
16 Grayscale with White Line (Horizontal)
17 Grayscale with White Line (Vertical)
18 Grayscale with White Line (Vertical
/Horizontal)
23 P Pattern
31 Grayscale (Horizontal, 8bit, Odd)
32 Grayscale (Vertical, 8bit, Odd)
33 Grayscale with White Line (Horizontal
8bit, Odd)
34 Grayscale with White Line (Vertical 8bit,
Odd)
35 Grayscale (Horizontal, 8bit, Even)
36 Grayscale (Vertical, 8bit, Even)
37 Grayscale with White Line (Horizontal
8bit, Even)
38 Grayscale with White Line (Vertical 8bit,
Even)
40 Grid (1-dot pair) (OR Outside Data 1)
41 Trimming Area (OR Outside Data)
4-53