Removal Procedure Of Parts To Be Disassembled And Assembled; Removing/Reinstalling The Covers - Konica Minolta DF-606 Service Manual

3. OTHER PARTS
3.2

Removal procedure of parts to be disassembled and assembled

Caution:
• Be sure to unplug the power cord of the main body from the power outlet.
3.2.1

Removing/reinstalling the covers

A. Procedure
[1]
[4]
[3]
8
[3]
[2]
15jff2c009na
[3]
[1]
[2]
15jff2c010na
[2] [1]
[3]
15jff2c011na
Field Service Ver1.0 Jun.2005
1. Remove the cap [2] of the top cover [1].
2. Remove 4 screws [3], and then remove the top
cover [1].
3. Remove the screw [1], and then remove the con-
nector cover [2].
4. Remove 2 screws [3], and then remove the rear
cover [4].
5. Remove 2 screws [1] and disconnect the connec-
tor [2], and then remove the operation panel
assembly [3].
6. Reinstall the above parts following the removal
steps in reverse.