Installing / Booting Up Hyper Terminal - Konica Minolta DF-606 Service Manual

2. SERVICE TOOL
2.1.2

Installing / Booting Up Hyper Terminal

Hyper Terminal is a terminal communications program which comes with Windows 98/Me/NT4.0/2000/XP as
standard. If it is not installed in your Windows 98/Me/NT4.0, it is necessary to install it.
Caution
• For Windows 2000/XP, it is installed by default. There is no need to install it.
• To install Hyper Terminal, the system program CD for the Windows PC in use is required.
• The procedure of setting up and booting up Hyper Terminal depends on the Windows version.
G. To install Hyper Terminal
In the following, Windows 98 is used as an example.
4
Field Service Ver2.0 August.2005
1.
Insert the CD containing OS of the Windows PC
in use into the CD drive.
2.
Select [Start]-[Settings]-[Control Panel].
• A [Control Panel] window will appear.
3.
Double-click [Add/Remove Programs].
• An [Add/Remove Programs Properties] window will
appear.
4.
Click the [Windows Setup] tab, and check the
[Connection] check box under [Components].
5.
Click the [Details] button.
• A [Communication] window will appear.
6.
Check the [Hyper Terminal] check box, and click
the [OK] button.
7. When the [Add/Remove Programs] window
reopens, click the [OK] button.
• The necessary files are copied and the installation is
completed.