Konica Minolta DF-606 Service Manual page 6

1. PRODUCT SPECIFICATIONS
Originals not allowed to be
fed
Combination of mixed origi-
nals
Note
• The information herein may be subject to change for improvement without notice.
D. Maintenance
Maintenance
Machine service life
E. Machine data
Power source
Maximum power consumption
Dimensions
Weight
F. Operating environment
Temperature
Humidity
2
The following originals are not allowed to be used:
OHP film, blueprint master, label paper, offset master, bonded original,
high-quality paper of less than 35 g/m
Combinations of the same and different size originals is available. The following
table shows the available combination of mixed originals.
Reference original (original with a maximum width)
A3
Other A3
origi-
A4
nals
B4
B5
A4R
A5
B5R X
A5R X
B6R X
: Single size : Same size
—: Cannot be set
Same as the main body.
Same as the main body.
24V/5.1V DC (supplied from the main body)
210W or less
650 (W) x 570 (D) x 170 (H) mm
Approx. 22kg
10 to 30°C
10 to 80% RH (with no condensation)
Field Service Ver1.0 Jun.2005
2
or more than 201 g/m
A4 B4 B5 A4R
— — —
— — —
—
—
X
X X X X
X X X X
: Different size X: Mixing not allowed
2
A5 B5R A5R B6R
— — — —
— — — —
— — — —
— — — —
— — —
— — —
— —
X X
—
X X