Konica Minolta DF-606 Service Manual page 271

Field Service Ver1.0 Jun.2005
[1]
[3] [2]
[3]
[1]
[3]
15smf2c006na
[2] [4]
[1]
15smf2c007na
10. With the conveyance guide plate [1] brought
down, insert the screw (M4 x 16 or larger) [3] into
the hole [2] of the stopper and fix it so that the
conveyance guide plate does not get back to the
original position.
11. Remove 4 hexagon socket head cap screws [1]
and then remove the blade /Lw [2].
Note
• When removing the blade /Lw, be sure to hold
the bracket [3] and the corner section [4].
• When removing the hexagon socket head cap
screw, be careful not to drop the washer.
• Be sure to avoid touching the edge of the
blade /Lw.
• Be careful not to drop the blade /Lw or dam-
age the edge by hitting it against a solid
object.
2. PERIODIC CHECK
9