Removal Procedure Of Parts To Be Disassembled And Assembled; Removing And Reinstalling The Rear Cover; Removing/Reinstalling Zu From The Main Body - Konica Minolta DF-606 Service Manual

3. OTHERS
3.3

Removal procedure of parts to be disassembled and assembled

Caution:
• Be sure to unplug the power cords of ZU and the main body from the power outlet.
3.3.1

Removing and reinstalling the rear cover

A. Procedure
[1] [2]
3.3.2

Removing/reinstalling ZU from the main body

A. Procedure
[1]
10
[5] [6]
[3] [4]
15kvf2c006na
15kvf2c007na
Field Service Ver1.0 Jun.2005
1. Remove the screw [1] and then remove the clamp
[2] and the power cord [3].
2. Loosen the screw [4] and remove 2 screws [5],
and then remove the rear cover [6].
3. Reinstall the above parts following the removal
steps in reverse.
1. Remove the power cord and the rear cover (See
"3.3.1 Removing and reinstalling the rear cover.")
2. Disconnect 2 connectors [1].