Pick-Up Release Amount Adjustment - Konica Minolta DF-606 Service Manual

Field Service Ver2.0 Aug.2005
4.7

Pick-up release amount adjustment

Conduct this adjustment when there occurs a no feed jam repeatedly and when the paper feed height (upper
limit) adjustment is made.
A. Procedure
[3]
[2]
Note
• When turning on power with no paper feed
roller unit installed, the paper lift plate does
not stop at its upper limit position, thus caus-
ing damage to the tray.
1. Turn ON the main power switch (SW1) and the
[1]
power switch (SW2) of the main body. And after
checking from the operating sound of the paper
lift motor that the paper lift plate has gone up fully,
turn OFF both of the switches.
2. Remove the upper door [1]. (See "3.2.1 Removing
and reinstalling the upper door.")
3. Remove 6 screws [2] and then remove the paper
feed cover [3].
15ssf3c007na
4. MECHANICAL ADJUSTMENT
47