Field Service Ver2.0 Aug.2005
3.3.11
Removing/reinstalling the paper exit unit
A. Procedure
[1]
In case of FS-509
[1]
[2]
15sjf2c053na
[2]
[3]
15sff2c020na
1. Remove the following parts.
•
Remove the upper cover /1 or optional PI
(See "3.3.1 Removing/reinstalling the upper
cover /1")
•
Upper cover /2 (See "3.3.2 Removing/rein-
stalling the upper cover /2")
•
Left cover (See "3.3.5 Removing/reinstalling
the left cover")
•
Rear cover (See "3.3.4 Removing/reinstalling
the rear cover")
•
Main tray (See "3.3.6 Removing/reinstalling
the main tray")
2. Remove 4 screws [1], and then remove the main
paper exit cover [2].
3. Remove the screw [3] from the paper exit open/
close link [2] of the paper exit unit [1].
3. OTHER PARTS
47
1