Field Service Ver1.0 Jun.2005
3.3.2
Removing/reinstalling the cover
[1]
[1]
[2]
15saf2c048na
15saf2c049na
12. Repeat the steps 10 and 11 until each of the
stopper pieces comes into contact with the dent
in the original stopper plate /Lt at the same time.
13. Install the angle adjustment plate [1] with screws
[2], 2 each.
14. Reinstall the main body rear cover.
1. Open the DF.
2. Remove 4 screws [1].
3. OTHERS
29