3. OTHERS
A. Removal procedure
Note
• Before starting work, be sure to bring the paper lift plate down to its lower most position in
advance by pressing the tray down switch (SW100) with electricity supplied.
[1]
[2]
[3]
[1]
[6]
[5]
22
15ssf2c030na
[2]
[1]
[1]
[2] [4]
15ssf2c031na
Field Service Ver2.0 Aug.2005
1. Open the upper door.
2. Remove LU from the main body.
3. Remove the following door and covers.
•
Upper door (See "3.2.1 Removing and rein-
stalling the upper door.")
•
Right cover (See "3.2.2 Removing and rein-
stalling the right cover.")
•
Front cover (See "3.2.3 Removing and rein-
stalling the front cover.")
•
Rear cover (See "3.2.4 Removing and rein-
stalling the rear cover.")
4. Remove 3 screws [1] and then remove the clutch
cover [2].
5. Remove the 5 connectors [1] and the 5 clamps
[2], and then remove the wiring [4] from the paper
lift motor mounting plate [3].
6. Remove the E-ring [5] and then remove a gear [6].