Konica Minolta DF-606 Service Manual page 13

Field Service Ver1.0 Jun.2005
[4]
[5]
[5]
[1]
[3] [2]
15saf2c013na
[3] [2] [1]
[6] [4]
15saf2c014na
3. Remove the C-clip [1] and then remove the gear
[2].
4. Slide 2 bearings [3] and remove the separation
roller unit [4].
5. Remove the bearing [1].
6. Remove the C-clip [2] and then remove the sepa-
ration roller [3].
Note
• When installing the separation roller, be sure
to set the cross cut [4] of the separation roller
to the projection [6] of the torque limiter [5].
2. PERIODIC CHECK
9