Table of Contents
Advertisement
Field Service Ver2.0 Aug.2005
B. Installation procedure
[7]
[1]
[5]
[6]
[4]
[3]
[2]
15swf2c011na
1. For the removal Step 35 to Step 9, reinstall the
parts following the removal steps in reverse.
2. With a screwdriver inserted into the hole [2] of the
remaining paper detection gear [1], set it upon the
position of the hole [4] of the paper lift motor
mounting plate [3].
Note
• Be sure to position the 2 holes with the paper
lift plate at its lower most position.
3. Insert the idle gear [5] into the shaft while taking
care that the position of the hole [2] of the remain-
ing paper detection gear [1] does not move.
Note
• While taking note of the direction in which the
idle gear [5] is inserted, check to see if it is
engaged securely with the gears [6] and [7].
4. For the removal Step 7 to Step 1, reinstall the
parts following the removal steps in reverse.
Note
• After completion of installation, be sure to
conduct the "Horizontal adjustment of the
paper lift plate." (See "4.3 Paper lift plate hori-
zontal adjustment.")
3. OTHERS
37
Advertisement
Chapters
Table of Contents
