Field Service Ver1.0 Jun.2005
MAINTENANCE
2. PERIODIC CHECK
2.1
Procedure for the maintenance of the paper feed section
Caution:
• Be sure to unplug the power cord of the main body from the power outlet.
2.1.1
Replacing the pick-up roller /Up and the paper feed roller /Up
A. Periodically replaced parts/cycle
•
Pick-up roller /Up: Every 1,000,000 prints (every 200,000 prints for actual replacement cycle)
•
Paper feed roller /Up: Every 500,000 prints (every 100,000 prints for actual replacement cycle)
B. Procedure
[2]
[1]
[1]
[2]
[3]
15jff2c001na
1. Remove the top cover (see "3.2.1 Removing/rein-
stalling the covers.")
2. Remove 2 C-clips [1], and then slide the bearings
[2] at the both sides and remove the paper feed
roller unit /Up [3].
2. PERIODIC CHECK
3