Removing/Reinstalling The Z-Folding/Conveyance Unit Stopper - Konica Minolta DF-606 Service Manual

Field Service Ver1.0 Jun.2005
[3] [4]
[5]
3.3.6

Removing/reinstalling the Z-folding/conveyance unit stopper

A. Procedure
[1] [2] [3] [1]
[5]
15kvf2c018na
[2] [1]
15kvf2c019na
8. Remove 4 screws [1], and then remove Z-folding/
conveyance unit [2] to the front [4] by holding the
rails [3] at the both sides.
Note
• When placing the Z-folding/conveyance unit,
place it on the flat surface with its top or left
side down.
• When reinstalling the Z-folding/conveyance
unit, be sure to place the rails [3] on the rail
holders [5] at 4 positions.
9. Reinstall the above parts following the removal
steps in reverse.
1. Open the front door, and then pull out the Z-fold-
ing/conveyance unit [1].
2. Remove 2 stopper screws [2] from left and right
rail and then pull out the Z-folding/conveyance
unit [1] further.
3. Reinstall the above parts following the removal
steps in reverse.
3. OTHERS
17