Konica Minolta DF-606 Service Manual page 111

Field Service Ver2.0 Aug.2005
[3]
[1]
[2]
15sff3c011na
4. MECHANICAL ADJUSTMENT
7. Loosen the 2 screws [1] and adjust the position of
the alignment plate /UpRr [2] so that it gets within
the standard value.
Note
• Be sure to loosen the 2 screws [1] fully in
advance so that the actuator [3] of the align-
ment plate home sensor is not displaced as
when the alignment plate /UpRr [2] for posi-
tion adjustment is moved.
8. After completion of the position adjustment,
tighten the 2 screws [1] to fix the alignment plate /
UpRr [2].
65
1