Konica Minolta DF-606 Service Manual page 66

2. PERIODIC CHECK
[2] [3]
[3]
20
[1]
[5] [4]
15sjf2c016na
[2] [1]
15sjf2c017na
Field Service Ver2.0 Aug.2005
11. Remove the screw [1] and slide the saddle stitch-
ing stopper motor mounting plate [2] one screw
hole space or so to the left to remove the side
stitch stopper release unit /Rr [3].
12. Remove the wiring harness from the clamp [4] of
the side stitch stopper release unit /Rr [3] and
then remove the connector [5].
Note
• When installing the side stitch stopper
release unit /Rr [1], be sure to insert in
advance the hook [2] provided at the rear of
the unit into the notch [3] in the rear of the
saddle stitching stopper motor mounting
plate.