BATTERYICHARGING SYSTEM
REGULATOR/RECTIFIER
WIRE HARNESS INSPEC"nON
BATrERY CHARGING LINE
Remove the right side cover (page 3-3).
With the ignition switch turned to
OFF,
disconnect
the regulator/rectifier 5P connector.
Measure the voltage between the Red/white wire
terminal
(+)
of the wire harness side connector and
ground (__).
There should be battery voltage at all times.
GROUND LINE
Check for continuity between the Green wire termi
nal of the wire harness side connector and ground.
There should be continuity at all times.
CHARGING: COIL LINE
Checkthecejrltinuity between the Yellow wire termi
nala,ndgl"qllnd.
There~houldbe no continuity.
l'v1ea~l..Ir~·th~·resl~tahce
between the Yellow wire'
terminals.
. .
If
the-re.~i~anCefTl.~~~l.J~~d·~!.~he
regu lator/rectifier
5P conneCt6r is abnormal, measure the resistance at
the alternator 3P connector (page 18-9).
18-8