Replacing Of The Separator Roll Assembly; Cleaning The Vertical Transport Roller/Roll - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 MAINTENANCE
02.08.08
4658D006AA
(4)

Replacing of the Separator Roll Assembly

<1st Drawer>
4134E052AA
<The 2nd drawer and the Paper Take-up Unit (optional) >
4658D002AA
(5)

Cleaning the Vertical Transport Roller/Roll

<The 2nd Drawer and the Paper Take-up Unit (optional) >
4134E050AA
3. Using a dry cloth, wipe the Paper Separator Roll
clean of dirt.
1. Slide out the drawer.
2. Remove two screws and the Paper Separator
Roll mounting bracket assembly.
NOTE
• Hold the reinforcement plate with your hand as it
may come off when the screws are removed.
• When reinstalling the reinforcement plate, make
sure that it is dowelled into position.
1. Slide out the drawer.
2. Remove two screws and the Paper Separator
Roll mounting bracket assembly.
1. Slide out the drawer.
2. Open the Right Door.
3. Using a dry cloth, wipe the vertical transport
roller/roll clean from dirt while turning the knob.
E-7