4-4 M3901 telephone set
Line key
Use the Line key for on-hook dialing or to take a call off hold. Access the DN
by taking the handset off-hook or by pressing the Line key. The DN must be
assigned to key 1.
Goodbye key
Use the Goodbye key to terminate an active call.
Hold key
Use the Hold key to put an active call on hold. Press the Line key to take a call
off hold. The MWI LED winks as a reminder that the call is on hold.
Compatible features
Refer to the Service Order Reference Manual for additional information.
M3901 key configuration
Table 4-1 shows the M3901 set key configurations. Nortel Networks does not
support the M3901 as a Call Center DN. The M3901 telephone firmware
controls the Volume Control Bar, the Hold, and Goodbye keys.
Table 4-1 M3901 key configuration
Description
key 1
key 2
key 3
key 4
key 5
key 6
#
other
Note 1: Configure key 1 as primary DN
Note 2: Configure keys 2-6 with any feature not requiring a display
Note 3: The M3901 telephone firmware controls the Volume Control Bar,
the Hold Key, and the Goodbye Key.
555-4001-136 Standard 04.02 May 2001
Key Number
Line (directory number)
See Note 1.
Feature
Feature
Feature
Feature
Feature (See Note 2)
Deactivate all features
Illegal or not defined