Assigning A Restriction Filter To An Extension - Nortel M7310 Quick Programming Manual

R e s t r i c t i o n s
ACTION
4. Enter the three-digit line number to which you want to assign
restrictions.
For this example, we chose line 001.
5. Press ≠.
6. Press '.
7. Press ≠.
8. Press '.
9. Press ≠.
10. Press .
CHANGE
11. Press ‚‚ to define restriction 00.
Restriction 00 has no restrictions. Now, any number can be
called, but from this line only.
12. Press ® to exit the session.
13. After a few seconds, the date and time reappear on the display.

ASSIGNING A RESTRICTION FILTER TO AN EXTENSION

ACTION
1. Begin the session by following the instructions under "To begin
a programming session" on page 9 using the System
Administrator Plus password.
2. Press ≠.
3. Enter the extension to which you want to add a restriction filter.
For this example, we used extension 227.
20
VISUAL DISPLAY
Show lines: 00-
BKSP LIST
Line 001:Line 001
FIND
Name:Line 001
CHANGE
Restrictions
COPY
Restrn filters
Line restrns
Normal:03
CLR CHANGE
Use flt:__
CANCL
Use flt: 0_
COPY BKSP LIST
Normal:00
CHANGE
End of session
1 Jan 1:00 am
VISUAL DISPLAY
Terminals&Extns
Show extn#:__
Show extn#:22_
BKSP LIST
227:227
COPY FIND