Last Number Redial; Speed Call - Nortel MERIDIAN M5316 User Manual

Quick ways to make calls: continued
last Number Redial
You can redial the last number you called on a specific line. This is
useful if the number
you called was busy and you want to reach the
person again.
To call using Last Number Redial:
1.
Press the line key used to make the last call.
2. Press
EJ
twice.
3. Lift the handset when the other party answers.
Speed Call
You can dial telephone numbers quickly and easily using one- or two-digit
codes. Speed Call provides you with I 0 one-digit codes (0-9) or up to 70
two-digit codes
(00--69).
Sec your Customer Service Representative or
System Admi nistrator to find out which type of codes are avaHable to you.
To program a Speed Call number:
I. Press
l spd call ].
2. Enter a one- or two-digit code
(0-9 or 00-69).
3. Dial the telephone number you want to assign to that code.
You can store telephone numbers up to 24 digits long. Note that if
there is a number already assigned to this code, the new number you
input erases the old.
4. Press
]spd Call ]
again.
5. Make a note of the Speed Call code and telephone number for
future reference.
To erase a programmed Speed Call number:
I. Press
lspd Call ] .
2. Enter the one- or two-digit code for the number you want to erase.
3. Press[] .
4. Press
;=I
s=-pd -= c--, al.,... l
---. 1
again.
To make a call using Speed Call:
1.
Lift the handset. (You can also press the desired line key or
IHandsfree
I
to start the call).
2. Press
I
Spd Call ] .
3. Dial the code for lhe telephone number you want to call.
16