Sync Time; Get Time - Avaya P334T-ML User Manual

the module.
Note: This command is not applicable to P330-ML switches, which determine the
PSU type automatically. This command is used to set the power supply types for
other P330 switches in the stack.
The syntax for this command is:
set psu type [AC|DC][module number]
Output Example:
P330-N> set psu type DC 3
Power supply type was changed to DC on module 3

sync time

Use the sync time command to synchronize the time used by all switches in a
stack.
The syntax for this command is:
sync time
Output Example:
P330-N# sync time
Time has been distributed.

get time

Use the get time command to retrieve the time from the network.
The syntax for this command is:
get time
Output Example:
P330-N# get time
Time is already being acquired from network!
Avaya P334T-ML User's Guidee
Chapter 6 CLI – Layer 2
133