Chapter 6
Avaya P130 CLI
Show port auto-negotiation-flowcontrol-advertisement Command
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flow control advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
show port auto-negotiation-flowcontrol-advertisement
[<mod_num>[/<port_num>]]
mod_num
port_num
Example:
P130-N> show port auto-negotiation-flowcontrol-advertisement
1/2
Port 1/2 advertises asym-tx-only flow control capabilities.
P130-N> show port auto-negotiation-flowcontrol-advertisement
Port 1/1
Port 1/2
Port 1/3 advertises no flow control capabilities.
etc.
Show port trap Command
Use the show port trap command to display information on SNMP generic link
up/down traps sent for a specific port.
The syntax for this command is:
show port trap [<mod_num>[/<port_num>]]
mod_num
port_num
Example:
P130-N> show port trap 1/1
Port 1/1 up/down trap is disabled
68
Module number
Number of the port on the module
does not support this feature.
does not support this feature.
Module number
Number of the port on the module
Avaya P130 User's Guide