Set Auto-Negotiation-Flowcontrol-Advertisement Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2
Cajun_P330-N# set flowcontrol send 1/51 off
Port 1/51 flow control send administration status set to off
(port will send flowcontrol to far end)
Cajun_P330-N# set flowcontrol all 1/17 proprietary
Port 1/17 flow control administration status set to
proprietary

Set auto-negotiation-flowcontrol-advertisement Command

The set auto-negotiation-flowcontrol-advertisement command sets the
flowcontrol advertisement for a Gigabit port when performing autonegotiation.
The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement <mod_num>/
<port_num> {no-flowcontrol|asym-tx-only|sym-only|sym-and-asym-rx}
no-flowcontrol
asym-tx-only
sym-only
sym-and-asym-rx
Example:
Cajun_P330-N#
1/51 asym-tx-only
Cajun_P330-N# Port 1/51 pause capabilities was set
96
The port will advertise no pause capabilities
The port will advertise asymmetric Tx pause capabilities only
The port will advertise symmetric pause capabilities only
The port will advertise both symmetric and asymmetric Rx
pause capabilities
set auto-negotiation-flowcontrol-advertisement
Avaya P333T User's Guide