Lanier Copier System Edition Operating Instructions Manual page 587

C C C C
Make sure that [Size Magnificatn] is high-
lighted.
D D D D
Enter the length of the original with the
number keys, and then press [#].
Note
You can enter sizes within the following
ranges:
Metric 1 – 999mm (in 1mm steps)
version
Inch 0.1" – 99.9" (in 0.1" steps)
version
To change the length entered, press
[Clear] or the { { { { Clear/Stop} } } } key, and then en-
ter the new length.
Operating Instructions Copy Reference <Advanced Features>
E E E E
Enter the length of the copy with the num-
ber keys, and then press [#].
Note
You can enter sizes within the following
ranges:
Metric 1 – 999mm (in 1mm steps)
version
Inch 0.1" – 99.9" (in 0.1" steps)
version
To change the length entered, press
[Clear] or the { { { { Clear/Stop} } } } key, and then en-
ter the new length.
To change the length after pressing [#],
select [Original] or [Copy], and then enter
the desired length.
F F F F
Press [OK].
12