Connection To Ieee 1394 Interface - Lanier Copier System Edition Operating Instructions Manual

C C C C
Connect the other end of the cable to the interface connector of the host
computer.
Reference
For more information about settings for printing with a parallel connec-
tion, see Printer Client Reference 1.

Connection to IEEE 1394 Interface

If the 1394 Interface Unit is installed, you can connect the IEEE 1394 interface ca-
ble to the machine.
Important
❒ To avoid electrical interference, use a shielded cable.
Limitation
❒ The IEEE 1394 interface can be used only with Windows 2000.
A A A A
Turn off the computer power.
B B B B
Turn off the main power switch.
Important
❒ Before turning off the main power switch, see p.19 "Turning On/Off the
Power".
C C C C
Connect the interface cable to the 1394 Interface Unit.
Note
❒ Either connector can be used.
D D D D
Connect the other end of the IEEE 1394 Interface cable to the computer.
E E E E
Turn on the main power switch.
ZDJP500J
Connecting the Machine
2
17