Lanier Copier System Edition Operating Instructions Manual page 752

Compression (Black & White)
This setting determines whether image data
read with the 2-value (black-and-white) set-
ting is to be compressed. Compression reduc-
es the time required for transferring the scan
data to the computer.
Note
The actual time required for data transfer
will vary, depending on the data size and
network load.
Compression (Gray Scale/Full Color)
This setting determines to what extent image
data read with the multi-value (gray-scale) or
full color setting is to be compressed. You can
select [Standard ], [High ], [Low], or [Off].
Note
Compression ratio decreases in the order
[High ], [Standard ], [Low], [Off], and the time
required for data transfer increases ac-
cordingly.
The actual time required for data transfer
will vary, depending on the data size and
network load.
Operating Instructions
Delivery Option
This setting determines whether the machine
is used as a network delivery scanner.
When the "Delivery Option" setting is
[On]"On", make sure that "Delivery IP Ad-
dress" in System Settings is set.
Original Setting
Set the initial value for original type and ori-
entation. When the original is always similar,
selecting this as the default makes operation
easier. You can select "1 Sided Original", "2
Sided Orig.: T to T" (Top to Top), "2 Sided
Orig.: T to B" (Top to Bottom).
Reference
p.60 "Original Orientation and Scan
Area Setting"
Original Orientation Priority
Select the initial value for original placement
orientation. When the original is always posi-
tioned in the same way, selecting this as the
default makes operation easier.
Reference
p.60 "Original Orientation and Scan
Area Setting"
Scanner Reference
36