Lanier Copier System Edition Operating Instructions Manual page 98

• You can load up to 10 envelopes (72 - 92 g/m
without forcibly pressing them. Confirm that the envelopes are not damp and that the top of the
stack is not higher than the limit mark on the side guide.
• Confirm that the print side is facing up when loading onto the Bypass Tray.
• When loading envelopes, be sure to unfold the flaps and position them opposite to the paper feed direction.
• Make the printer driver's setting for rotating the print image by 180 degrees. For details, see the
Help file for the printer driver.
• Confirm that there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print
margin to at least 15 mm (0.6").
• Do not print on both sides of envelopes.
• Load only one size and type of envelope at the same time.
• Before loading envelopes, flatten their leading edges (the side being fed into the printer) by run-
ning a pencil or ruler across them.
• Before loading envelopes, confirm that they are rectangular in shape.
• The supported size of envelopes is listed in "Paper and Other Media" in Maintenance Guide 2.
Operating Instructions
2
Maintenance Guide 2 Copier System Edition
, 19 - 24 lb) in the Bypass Tray at the same time,
27