3. Communication Information
Printing the Journal
The Journal contains information about the last
50 communications made by your machine. It is
printed automatically after every 50 communica-
tions (receptions+transmissions).
If the machine is installed with the optional ISDN
Unit or the optional Extra G3 Interface Unit, you
can print the Journal of each line type.
You can also print a copy of the Journal at any
time by following the procedure below.
Important
The contents of a Journal printed automatical-
ly are deleted after printing. If you administer
the history of transmissions and receptions,
we recommend that you keep the Journal.
You can check a total of 200 communications
(1,000 with the optional Fax Function Up-
grade unit) (receptions+transmissions) on the
display.
All
Prints the results of communications in the
order made.
Print per File No.
Prints only the results of communications
specified by file number.
Operating
InstructionsFacsimile Reference (option) <Advanced Features>
Print per User Code
Prints only the results of communications
for a specified User Code.
"Reading the Display Panel and Using
Keys
--
User Code Management" in the
Basic Features manual
Note
The Journal is printed automatically after ev-
ery 50 communications (receptions+transmis-
sions).
The sender's name column of the Journal is
useful when you need to program a special
sender.
If you do not want the Journal printed, you can
turn it off.
p.216 "Changing the User Pa-
rameters"
(Switch03, Bit7)
You can set whether the Journal is automati-
cally printed after every 50 communications in
User Parameters.
User Parameters"
(Switch03, Bit7)
You can set whether you print the Journal by
line type.
p.216 "Changing the User Param-
eters"
(Switch19, Bit1)
Chapter 1
p.216 "Changing the
45