Lanier Copier System Edition Operating Instructions Manual page 467

Message
Required computer name (<Computer name>) is dupli-
cated name
Required file server ("file server name") not found
restarted.
sap enable, saptype=<SAP type>, sapname=<sap name> The SAP function has started. The SAP (SAP type and
Set context to <NDS context name>
shutdown signal received. network service rebooting...
smbd start. (NetBEUI)
Snmp over ip is ready.
Snmp over ipx is ready.
snmpd start.
The print server received error "error number" during at-
tempt to log in to the network.Access to the network was
denied.Verify that the print server name and password are
correct.
Operating Instructions
Description and Solutions
The same computer name is detected on the network. The
start job determines the computer name by adding the
computer name to the suffix (0,1....). Configure a new
computer name that is unique.
Cannot find the required file server.
LPD has started.
SAP name) packet is issued to advertise the service on the
SAP table on the NetWare server.
A <NDS context name> has been set.
Rebooting the network service.
An smbd (SMB (Server Message Block) service) has
started.
Communication over TCP/IP with SNMP is available.
Communication over IPX with SNMP is available.
SNMP service has started.
Cannot log in to the file server. The print server is not reg-
istered or the password is specified. Register the print
server without specifying a password.
Administrator Reference 2
238