Lanier Copier System Edition Operating Instructions Manual page 450

Messages
No Paper: Tray 2
No Paper: Tray 3
No Paper: Tray 3 (LCT)
No Paper: Tray 4
No Paper: User Selected Tray
Not Detected: Duplex Unit
Not Detected: Fusing Unit
Not Detected: Input Tray(s)
Not Detected: Black Toner
Operating Instructions
Description
There is no paper in the optional Pa-
per Feed Unit (Tray2).
There is no paper in the optional Pa-
per Feed Unit (Tray3).
There is no paper in the optional LCT
(Tray3).
There is no paper in the optional Pa-
per Feed Unit (Tray4).
There is no paper in the selected tray. Load paper into the selected tray. See
The optional Duplex Unit is not set
correctly.
An error has occurred in the Duplex
Unit.
The fusing unit is not set correctly.
The input tray is not set correctly.
The toner cartridge is not set correct-
ly.
Administrator Reference 2
Comments
Load paper into the bypass tray. See
Maintenance Guide 2.
Load paper into the bypass tray. See
Maintenance Guide 2.
Load paper into the bypass tray. See
Maintenance Guide 2.
Load paper into the bypass tray. See
Maintenance Guide 2.
Setup Guide.
Set the optional Duplex Unit correct-
ly. If the message appears again, call
your sales or service representative.
Set the fusing unit correctly. If the
message appears again, call your
sales or service representative.
Set the input tray correctly. If the
message appears again, call your
sales or service representative.
Set the toner cartridge correctly. If
the message appears again, call your
sales or service representative.
221