Adjusting Copy Image Density - Lanier Copier System Edition Operating Instructions Manual

Basic Copying
Two Color Mode (Red & Black)
Copies the red colored areas in the
original in red, and other areas in
1
black or white.
Note
❒ If you set the color width to
"Wide" a reddish color close to or-
ange or purple will be recognized
as a Red. This adjustment is also
active when using "Erase Color".
⇒ "Erasing Colors", Advanced Fea-
tures manual
A A A A
Press the { { { { Two-color} } } } key.
B B B B
Press [Red & Black].
C C C C
Press [OK].
Note
❒ If you do not wish to set any
o t h e r f u n c t i o n s , p r e s s t h e
{ { { { Start} } } } key to start copying.
26

Adjusting Copy Image Density

You can adjust the copy image densi-
ty to match your originals.
There are three types of adjustment
available:
❖ ❖ ❖ ❖ Auto Image Density
The machine automatically detects
and adjusts the image density and
copies so that the background of
dirty originals, such as newspa-
pers and recycled paper, does not
come out.
❖ ❖ ❖ ❖ Manual Image Density
You can adjust the image density
manually from 9 levels.
❖ ❖ ❖ ❖ Combined Auto and Manual Image
Density
Use when copying originals with a
dirty background (such as news-
papers). You can adjust the fore-
ground density while leaving the
background unchanged.
Auto Image Density
A A A A
Make sure that [Auto Image Density]
is selected.
Note
❒ If [Auto Image Density] is not se-
lected, press [Auto Image Density].
❒ If you do not wish to set any
o t h e r f u n c t i o n s , p r e s s t h e
{ { { { Start} } } } key to start copying.