Sid Code; Sep Code - Lanier Copier System Edition Operating Instructions Manual

L L L L
Press the { { { { Start} } } } key.
Note
If you use Immediate Transmission and
the destination fax machine does not sup-
port the SUB Code feature, a message will
appear on the display to inform you of this.
In this case, press [OK] to cancel the trans-
mission.

SID Code

There are times when you may wish to use a
"SID" (Sender ID) when sending confidential
faxes with the SUB Code feature.
Limitation
You can enter a SID using up to 20 digits.
Note
You can store IDs in Quick Dials, Groups and
Programs. Chapter 3, "Quick Dial",
"Groups" in the Basic Features manual and,
p.153 "Registering and Changing Key-
stroke Programs"
Messages you send using this feature are
marked "SID" on all reports.
ports/Lists"
Operating InstructionsFacsimile Reference (option) <Advanced Features>
p.187 "Re-

SEP Code

Normally you can only use Polling Reception to
receive faxes from machines that have the Poll-
ing Reception feature of the same make. Howev-
er, if a machine of another make supports a
Polling Reception, you can receive fax messages
from the other party using this method instead.
Poll the other machine. You can receive messag-
es that have the same SEP Code as the SEP Code
you entered.
Limitation
You can only use this feature with a G3 line
(not with G4).
You cannot use Chain Dial with this feature.
p.73 "Chain Dial"
78