When Memory Is Full - Lanier Copier System Edition Operating Instructions Manual

When Memory Is Full

Limitation
If memory is full, Interrupt Copy will not be available.
Note
If you set "Memory Full Auto Scan Restart" of the User Tools to "Yes", the memory overflow mes-
sage will not be displayed, but make Connect Copy for the scanned original automatically. Connect
Copy continues scanning and copying until finishing the job. Note that copy sets will be printed out
separately by scanning at this time.
Message
Memory is full.*originals have been
scanned.
Press [Print] to copy scanned origi-
nals. Do not remove remaining origi-
nals.
Note
Copying will stop and this
message will be displayed
when the memory is full.
Press [Continue] to scan and copy re-
maining originals.
[Stop] [Continue]
Operating Instructions
Cause
The scanned original exceeds the
number of pages that can be stored in
memory.
The machine checks if the remaining
original should be copied, after the
scanned original has been printed.
Copy Reference <Advanced Features>
Solution & Reference
Press [Print] to copy scanned origi-
nals and clear the scanning data.
Press [Clear] to clear the scanning
data and not copy.
To continue copying, remove all cop-
ies then press [Continue]. To stop
copying, press [Stop].
83