Sample Copy - Lanier Copier System Edition Operating Instructions Manual

To Interrupt Copying after All Originals Have
been Fed Using the Optional Document
Feeder (ADF) or Exposure Glass
A A A A
Press the { { { { Interrupt} } } } key.
The Interrupt indicator lights up.
Note
Copying will not stop yet.
B B B B
Place your originals.
C C C C
Press the { { { { Start} } } } key.
The machine stops the original job and starts
copying your original.
D D D D
When copying is complete, remove your
originals and copies.
Operating Instructions Copy Reference <Advanced Features>
E E E E
Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes off.
Note
The previous copy job settings will be re-
stored and the machine will continue copy-
ing from where it left off.

Sample Copy

The optional hard disk unit (40 GB) is required.
Use this function to check a copy set before mak-
ing a long copy run.
Limitation
This function can be used only when the Sort
function has been turned on.
You cannot use Sample Copy when using the
Bypass Tray.
A A A A
Select Sort and any other functions, and
then enter the number of copy sets to be
made.
B B B B
Place your originals.
70