Standby Display - Lanier Copier System Edition Operating Instructions Manual

Getting Started

Standby Display

While the machine is in standby mode (immediately after the { { { { Facsimile} } } } key is
pressed or after the { { { { Clear Modes} } } } key is pressed), the following display is
1
shown.
❖ ❖ ❖ ❖ Memory Transmission (Initial display)
❖ ❖ ❖ ❖ Immediate Transmission
Note
❒ To return the machine to standby mode, do one of the following:
• If you have placed the original on the optional Document Feeder (ADF)
and have not pressed the { { { { Start} } } } key, remove the original.
• If you have not placed an original, press the { { { { Clear Modes} } } } key.
• If you are in User Tools mode, press the { { { { User Tools/Counter} } } } key.
12