Staple - Lanier Copier System Edition Operating Instructions Manual

Staple

The optional 2 Tray Finisher and hard disk unit (40 GB) are required.
Each copy set can be stapled together.
Limitation
❒ You cannot use the Bypass Tray with this function.
❒ You cannot use the following paper in this function:
• Postcards
• Translucent paper
• OHP transparencies
• Adhesive labels
• Curled paper
• Paper of low stiffness
• Paper of different vertical sizes
Note
❒ Stapling cannot occur when copying on thick paper as well as OHP transpar-
encies.
❒ When the number of copies exceeds the tray capacity, copying stops. In this
case, remove the copies from the shift tray, and then resume copying.
❖ ❖ ❖ ❖ Metric version
Paper size
Stapler capacity
Shift Tray capacity
*1
(A4K)
A3L, B4L, A4KL, B5KL
• A4KL, B5KL: 50 sheets (80g/m
• A3L, B4L: 30 sheets (80g/m
• Mixed Size: 30 sheets (80g/m
• Finisher Shift Tray 1: 500 sheets (80g/m
• Finisher Shift Tray 2: 1,500 sheets (80g/m
mode: 2000 sheets (80g/m
2
)
2
)
2
)
2
)
2
) (Large capacity
2
))
Sort/Stack/Staple
1
49